R33 Front Turn Signal

R33 GTR Clear Front Turn Signal DIY

This is a simple DIY to help refresh the front end of your R33. Get rid of those warn/faded orange turn signals and replace them with some clear/crisp markers.

Step I

- Grab a phillip heads screw driver and remove the two screws in the green circles.

- Once the screws are removed, pull the inside corners toward you to remove the housing vents.

Step II

- Getting these things in and out is the hardest part of the job.

- I ended up using vice-grips on the light bulb housing to get them off.

Step III

- Add some lithium grease to the back of the rubber housing to ease your new markers into the vent housing.

Step V

-Thats it, just reinstall everything back together and enjoy the updated look.

Here are the two side by side if you want to see the difference.