R33 GTR Side Indicator DIY Guide
The very first upgrade I did to my Skyline was get rid of those worn front and side yellow turn signals.
I choose the Nismo smoke signals over the clear as I ultimately was going to go with back rims on the car.
This is a very easy DIY, you can do it no matter how mechanically inept you may be.
Use two fingers and push the left side toward the front of the car and pull out.
It should just slide right out and expose the wiring harness.
Don't unplug the harness, rotate the turn signal to expose the bulb housing.
I can't remember if the side markers came with new bulbs or not, but now is the perfect time to repalce them.
Angel the right side back into the fender and gently snap the left side back down.
Give it a little wiggle to make sure it is secured and fucntion check both sides.
Here is a side by side comparision, makes a huge diffrent. Check out my front turn signal guide here!
